AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
2011 mac mini ssd hard drive upgrade3/8/2024 You can even do a software RAID without special software. I recommend to replace this drive with SSD as well. Your system will still suffer from the HDD in your system, as you have to wait for spin-up time at boot and wake-up from standby. MNaybe this is correct for 2010 model, but certainly not for 2011.ģ. It will not fit under the GPU heatsing, and this would anyway not be a good location in terms of heat. If the SSD is in addition to the HDD, the correct location is under the optical drive. Normally, you need the slim-SATA to SATA cable. So you can't use a standard SATA power cable. The SATA data connector on the logic board can use a standard SATA data cable (should be 90 degrees angled), but the SATA power connector is slim SATA. Sorry for asking relatively simpleton question - macs are never quite straightforward to upgrade compared to say. Anything I do to my newly acquired 2011 unit will be as good if not MUCH better than my 2010 machine so I want to get it right the first time out the gates. That 2010 unit I did has 6 TB of total storage of it, 1TB being SSD boot drive and that machine screams still. When I did my 2010 iMac I went the exact factory route by buying the apple SSD bracket and the genuine apple cable for dual drives and installed a thermal sensing cable onto the exterior of the new HDD. I know this isn't rocket science but I'd rather be prepared when I tear into the 2011 iMac and be able to swap out my video card, cpu and install the ssd drive under the optical drive and have it all go without a hitch rather than trying piecemeal bit by bit having to take apart the unit multiple times. Should I buy them with 90 degree bends in them or all straight cables? I think from what I can tell and what I remember about the insides of my 2010 iMac for reference purposes that the logic board connectors should be 90 where possible and to get cables that are as thin as possible. Judging by the connector on the logic board it would seem like I can buy a regular plain old SATA cable and SATA power cable from ANY computer store and use them. I want to keep the original 1TB drive for large file storage. Unlike the swap out you can prep the drive once you have it installed and switch the boot up to the SSD or you can create a Fusion Drive.Okay, so after watching the install video from OWC on the SSD behind the optical drive I'm dead set on installing it that way. You will need the cable and SSD drive for parts. Here is what you'll need to add-in the PCIe SSD: Mac Mini Late 2014 PCIe SSD Cable Replacement. But if you don't have already a backup drive you'll need this as well: Startech 2.5" SATA to USB adapter so you can prep the new drive as well as migrate your stuff over to the new drive. You only need the replacement drive here. Review here the needed steps to swap out the drive: Mac Mini Late 2014 Hard Drive Replacement. If you want to take the least risky path this is what I would do. Of the different options adding in the blade SSD is by far the least amount of work but sadly a bit more expensive. I would look at going with either swapping out the drive for a SSHD if the Final Cut Pro projects are small in size and a dual drive if they are larger. Smaller SSD's need more 1/3 of the drive free. Remember, you'll need to keep about 1/4 of the drive free so you don't over wear the drive. Many people find they tend to need more space than 500 GB. A SSHD or a dual drive config maybe the better way Vs going with a SSD swap out. The HD model does not come with the needed cable to add in a second drive here (blade SSD) but it can be added! Making a dual drive config.Īs you are using Final Cut Pro you'll need to think through how big a project you'll be working on. As you got the HD model you are limited on swapping out the HD with either the SSD or a hybrid SSHD drive as the easiest options without needing parts but more involved in taking apart. Unlike the older series this system only offers one SATA port and a custom connector for an Apple proprietary SSD drive. So you do need to use care here as you can damage things which Apple won't cover under warranty.īut before you decide on what to do, lets look at the options. Apple can get a bit fussy when people alter their systems either drives or memory (depending on the exact model and what you do).
0 Comments
Read More
Leave a Reply. |